6700 Adjustable

Application
Measures gasoline or diesel fuel levels in tanks on trucks, boats, generators, recreational vehicles, and other applications.

General Information & Features
These top mounting magnetic liquid-level gauges are built to the high standards of all Rochester designed instruments. The construction permits the replacement of dials when necessary without releasing fumes or liquid to the atmosphere.

Both available dials are fractional and silicone-dampened, and are easily replaced by removing and reinstalling two screws. Rochester’s rugged gear drive incorporates shrouded, stainless-steel, beveled gears designed to work out any loose particles that might affect gear function. Sealing between the gauge and the tank is achieved through the use of the 0015-00423 Buna-N gasket.

Adjustable liquid-level gauges are designed for top mounting only. These gauges are equipped with 20.5″ [520mm] long float arms which can be cut to fit tank dimensions. Request data sheet DS-337 for proper cut lengths and instructions on how to install the float and crimp it in place.

Model Number Magnet Available Dials
6741 Large Alnico Direct-reading dial or TwinSite® sender.
Choice of 0-90, 240-30 Ohms
6781 Small Alnico Direct-reading dial only.

Model Selection Chart

Model Number Dial Used Gasket Used
6741-00183 Not Furnished 0015-00423
6741-00290 P5744S02541
6741-00333 Not Furnished
6741-00248 5323S01834 0015-00423

Documents
Data Sheet
Installation Instructions MS-532

Description


Tank Depth in Inches Distance from Float Bend to Float Rod Cut-off Point
6 3″
7 3-3/4″
8 4-5/8″
9 5-5/8″
10 6-5/8″
11 7-5/8″
12 8-5/8″
13 9-3/4″
14 10-3/4″
15 11-3/4″
16 12-3/4″
17 13-3/4″
18 14-7/8″
19 15-7/8″
20 16-7/8″
21 17-7/8″
Tank Depth in Inches Distance from Float Bend to Float Rod Cut-off Point
22 18-7/8″
23 20″
24 21″
25 22″
26 23″
27 24″
28 25-1/8″
29 26-1/8″
30 27-1/8″
31 28-1/8″
32 29-1/8″
33 30-1/4″
34 31-1/4″
35 32-1/4″
36 33-1/4″

General Specifications*

Mounting
Recommended for top-mounting only.

Accuracy
Accuracy depends upon proper gauge sizing. Junior dials ±7%, TwinSite® dials ±12%. Accuracy may be less depending upon tank shape. Accuracy may be less near full and empty. Accuracy may be less if tank is not level. This gauge is not to be used for filling. All accuracy estimates are expressed as a percent of full scale.

Temperature
-40°F to 158°F, -40°C to 70°C.
Humidity
For high humidity and marine applications, painting of gauge, less dial, is recommended.

Shock & Vibration
Suitable to mobile applications.

Power
0.5 watts maximum for TwinSite® versions.

Tank Pressure
0 to 10 PSIG [0 to 0,68 Bar].

Approvals
Some models are UL recognized for marine service. Some models are UL listed for flammable fluids. Passes BIA fire test.

Note: For Installation Instructions see MS-532.

*Materials and specifications are subject to change without notice. Pressure ratings subject to change due to temperature and other environmental considerations.

Materials of Construction*

Head
Die cast aluminum with standard SAE gasoline gauge flange (2-1/8″ [54 mm] bolt circle for five #10 screws not furnished.)

Centershaft, Support Tube & Float Rod
Tempered aluminum.

Gears, Cross Stud & Bearing
Stainless steel.

Drive Magnet
Alnico.

Gear Housing
Acetal plastic or aluminum.

Float
Nitrile rubber.

Gasket
Buna-N, 0015-00423.

Direct Reading Dial
Hermetically sealed polycarbonate.

TwinSite® Sender
Polyamide.

When Ordering Specify:

1. Gauge model number.
2. Tank depth.
3. Float orientation, 3 o’clock standard.
4. Details on any optional features.

You may also like…