Descripción
Profundidad del tanque en pulgadas | Distancia desde la curva de flotación hasta el punto de corte de varilla flotante |
---|---|
6 | 3″ |
7 | 3-3/4 " |
8 | 4-5/8 " |
9 | 5-5/8 " |
10 | 6-5/8 " |
11 | 7-5/8 " |
12 | 8-5/8 " |
13 | 9-3/4 " |
14 | 10-3/4 " |
15 | 11-3/4 " |
16 | 12-3/4 " |
17 | 13-3/4 " |
18 | 14-7/8 " |
19 | 15-7/8 " |
20 | 16-7/8 " |
21 | 17-7/8 " |
Profundidad del tanque en pulgadas | Distancia desde la curva de flotación hasta el punto de corte de varilla flotante |
---|---|
22 | 18-7/8 " |
23 | 20″ |
24 | 21″ |
25 | 22″ |
26 | 23″ |
27 | 24″ |
28 | 25-1/8 " |
29 | 26-1/8 " |
30 | 27-1/8 " |
31 | 28-1/8 " |
32 | 29-1/8 " |
33 | 30-1/4 " |
34 | 31-1/4 " |
35 | 32-1/4 " |
36 | 33-1/4 " |
Especificaciones generales *
Mounting
Recommended for top-mounting only.
Accuracy
Accuracy depends upon proper gauge sizing. Junior dials ±7%, TwinSite® dials ±12%. Accuracy may be less depending upon tank shape. Accuracy may be less near full and empty. Accuracy may be less if tank is not level. This gauge is not to be used for filling. All accuracy estimates are expressed as a percent of full scale.
Temperature
-40°F to 158°F, -40°C to 70°C.
Humidity
For high humidity and marine applications, painting of gauge, less dial, is recommended.
Shock & Vibration
Suitable to mobile applications.
Power
0.5 watts maximum for TwinSite® versions.
Tank Pressure
0 to 10 PSIG [0 to 0,68 Bar].
Approvals
Some models are UL recognized for marine service. Some models are UL listed for flammable fluids. Passes BIA fire test.
Note: For Installation Instructions see MS-532.
* Los materiales y especificaciones están sujetos a cambios sin previo aviso. Las clasificaciones de presión están sujetas a cambios debido a la temperatura y otras consideraciones medioambientales.
Materiales de construcción *
Head
Die cast aluminum with standard SAE gasoline gauge flange (2-1/8″ [54 mm] bolt circle for five #10 screws not furnished.)
Centershaft, Support Tube & Float Rod
Tempered aluminum.
Gears, Cross Stud & Bearing
Stainless steel.
Drive Magnet
Alnico.
Gear Housing
Acetal plastic or aluminum.
Float
Nitrile rubber.
Gasket
Buna-N, 0015-00423.
Direct Reading Dial
Hermetically sealed polycarbonate.
TwinSite® Sender
Polyamide.
Al ordenar especifique:
1. Gauge model number.
2. Tank depth.
3. Float orientation, 3 o’clock standard.
4. Details on any optional features.
2. Tank depth.
3. Float orientation, 3 o’clock standard.
4. Details on any optional features.