描述
英寸内的储罐深度 | 从浮子弯道到浮子杆截止点的距离 |
---|---|
6 | 3″ |
7 | 3---" |
8 | 4-5 " |
9 | 5-5 " |
10 | 6-5 " |
11 | 7-5 " |
12 | 8-5 " |
13 | 9-" |
14 | 10-" |
15 | 11-" |
16 | 12-" |
17 | 13-" |
18 | 14-7/8 " |
19 | 15-7/8 " |
20 | 16-7/8 " |
21 | 17-7/8 " |
英寸内的储罐深度 | 从浮子弯道到浮子杆截止点的距离 |
---|---|
22 | 18-7 " |
23 | 20″ |
24 | 21″ |
25 | 22″ |
26 | 23″ |
27 | 24″ |
28 | 25 " |
29 | 26-半 " |
30 | 27-5 " |
31 | 28 " |
32 | 29----1 " |
33 | 30-5 " |
34 | 31--" |
35 | 32-5 " |
36 | 33-5 " |
一般规格 *
Mounting
Recommended for top-mounting only.
Accuracy
Accuracy depends upon proper gauge sizing. Junior dials ±7%, TwinSite® dials ±12%. Accuracy may be less depending upon tank shape. Accuracy may be less near full and empty. Accuracy may be less if tank is not level. This gauge is not to be used for filling. All accuracy estimates are expressed as a percent of full scale.
Temperature
-40°F to 158°F, -40°C to 70°C.
Humidity
For high humidity and marine applications, painting of gauge, less dial, is recommended.
Shock & Vibration
Suitable to mobile applications.
Power
0.5 watts maximum for TwinSite® versions.
Tank Pressure
0 to 10 PSIG [0 to 0,68 Bar].
Approvals
Some models are UL recognized for marine service. Some models are UL listed for flammable fluids. Passes BIA fire test.
Note: For Installation Instructions see MS-532.
* 材料和规格如有更改, 恕不另行通知。压力额定值可能会因温度和其他环境因素而发生变化。
建筑材料 *
Head
Die cast aluminum with standard SAE gasoline gauge flange (2-1/8″ [54 mm] bolt circle for five #10 screws not furnished.)
Centershaft, Support Tube & Float Rod
Tempered aluminum.
Gears, Cross Stud & Bearing
Stainless steel.
Drive Magnet
Alnico.
Gear Housing
Acetal plastic or aluminum.
Float
Nitrile rubber.
Gasket
Buna-N, 0015-00423.
Direct Reading Dial
Hermetically sealed polycarbonate.
TwinSite® Sender
Polyamide.
订购时指定:
1. Gauge model number.
2. Tank depth.
3. Float orientation, 3 o’clock standard.
4. Details on any optional features.
2. Tank depth.
3. Float orientation, 3 o’clock standard.
4. Details on any optional features.