Descripción
Especificaciones generales *
Operating Temperature
-40° to 80°C (-40°F to 176°F).
Accuracy
Voltage output ±4% (full scale) of visual dial indication. (Float gauge errors not included.) See DS-1318 for nominal output voltages corresponding with dial graduations.
Repeatability
±1%.
Operational Voltage Range
3.5 to 6.0 vdc/ratiometric.
Output Voltage
Ratiometric 5-80% of input voltage @ 5-80% volume.
Resolution
Infinite.
Operating Current
4.5 mA.
Output Current
±1 MA.
Los módulos de efecto Hall son clasificados UL como intrínsecamente seguros para la clase 1, División 1, grupos C & D (ubicaciones peligrosas). Ver WD-570 para el dibujo de control.
Al ordenar especifique:
1. Junior, Senior or Snap-on; Horizontal, Vertical or Below Ground tank.
2. Or part number.
* Los materiales y especificaciones están sujetos a cambios sin previo aviso. Las clasificaciones de presión están sujetas a cambios debido a la temperatura y otras consideraciones medioambientales.
WARNING! This sensor is not to be used as the primary means of determining high or low fuel condition. It must not be used in the absence of
redundant systems in critical applications where there may be significant safety risk or financial exposure in the event of fuel overfill or fuel exhaustion
condition. This sensor is not to be used for tank filling.
Materiales de construcción *
Crystal & Case
Polycarbonate.
Dial
Painted aluminum.
¿Cómo pedir
Remote Ready Dial (R3D®)
Número de pieza | Estilo | Tanque |
---|---|---|
5909s02733 | Jr. | Horizontal |
5986s02733 | Sr. | |
5AAAs02733 | Snap-on | |
5909s02772 | Jr. | DOT vertical |
5909s02799 | Jr. | Bajo tierra |
Hall Effect Components**
Modelo | Estilo | Cables |
---|---|---|
9700-00005 | Kit de módulo de efecto Hall: carcasa, PCB, casquillo de potting vertical | N/A |
9701-00014 | Efecto Hall Modul en mache (vertical) | 6 pies |
9701-00048 | Efecto Hall Modul en macetas (vertical) con conector Packard (15336029) | 5 pies |
0023-00537 | Tapa de potting recta | N/A |
0023-00535 | Casquillo de potting vertical | N/A |
**Hall Effect Components only available through remote monitor OEM’s.
Warning! For LP-gas and other flammable product service applications, connect only to circuits and power sources Classified and labeled as Intrinsically Safe for Class 1, Division 1, Group C and D hazardous locations. The connection of non-intrinsically safe power could cause fire or explosion of flammable vapor which may be present.