Descripción
Especificaciones generales *
Temperature
Extremes are -40°F to 158°F, -40°C to 70°C.
Working Pressure
375 psig [25,8 Bar]
Accuracy
Accuracy depends upon proper gauge sizing and is typically ±5% of R3D® dial indication. Accuracy may be less due to variations in liquid temperature. Accuracy may be less for some tank shapes and sizes. Accuracy may be less if tank is not level. Accuracy may be less near empty and full. This gauge is not to be used for filling. R3D® dial output voltage is typically ±4% of indicated reading. All accuracy estimates are percent of full scale.
Approvals
Gauge is UL listed for LP Gas service applications.
R3D® Module is UL Classified as intrinsically safe.
Al ordenar especifique:
1. Specify tank diameter (shown on tank nameplate).
2. Specify the gauge mounting location.
3. State they type of cylinder, horizontal or vertical.
4. Specify the “H” dimension. This is the distance in inches from the surface of the tank to the top of the threaded opening.
Para ordenar el medidor de reemplazo, simplemente proporcione la información estampada en los pisos desgarradores hexagonales como se muestra en el ejemplo.
Materiales de construcción *
Head
Brass forging.
Centershaft Bearings, Pinion Gear, Cross Stud & Bearing, & Sector Gear
Stainless steel.
Gear Housing
Acetal.
Support, Centershaft & Float Rod
Tempered aluminum.
Float
Nitrile rubber.
Counterweight
Lead.
Magnet
Neo.
Direct-reading Dials
Hermetically sealed polycarbonate.
R3D® Direct-reading Dial
Hermetically sealed polycarbonate.
* Los materiales y especificaciones están sujetos a cambios sin previo aviso. Las clasificaciones de presión están sujetas a cambios debido a la temperatura y otras consideraciones medioambientales.