描述
英寸内的储罐深度 | 从浮子弯道到浮子杆截止点的距离 |
---|---|
6 | 3″ |
7 | 3---" |
8 | 4-5 " |
9 | 5-5 " |
10 | 6-5 " |
11 | 7-5 " |
12 | 8-5 " |
13 | 9-" |
14 | 10-" |
15 | 11-" |
16 | 12-" |
17 | 13-" |
18 | 14-7/8 " |
19 | 15-7/8 " |
20 | 16-7/8 " |
21 | 17-7/8 " |
英寸内的储罐深度 | 从浮子弯道到浮子杆截止点的距离 |
---|---|
22 | 18-7 " |
23 | 20″ |
24 | 21″ |
25 | 22″ |
26 | 23″ |
27 | 24″ |
28 | 25 " |
29 | 26-半 " |
30 | 27-5 " |
31 | 28 " |
32 | 29----1 " |
33 | 30-5 " |
34 | 31--" |
35 | 32-5 " |
36 | 33-5 " |
一般规格 *
Mounting
Recommended for top-mounting only.
Accuracy
Accuracy depends upon proper gauge sizing. Junior dials ±7%, TwinSite® dials ±12%. Accuracy may be less depending upon tank shape. Accuracy may be less near full and empty. Accuracy may be less if tank is not level. This gauge is not to be used for filling. All accuracy estimates are expressed as a percent of full scale.
Temperature
Standard range is -40°F to 158°F, -40°C to 70°C.
Shock & Vibration
Suitable to mobile applications.
Power
0.5 watts maximum for TwinSite® versions.
Tank Pressure
0 to 10 PSIG [0 to 0,68 Bar].
Approvals
UL recognized for marine water service.
Note: Installation Instructions MS-533.
* 材料和规格如有更改, 恕不另行通知。压力额定值可能会因温度和其他环境因素而发生变化。
建筑材料 *
Head
Lightweight injection molded polyester SAE gasoline gauge flange (2-1/8″ [54] bolt circle for five #10 screws not furnished).
Centershaft, Support Tube & Float Rod
Brass.
Gears, Cross Stud & Bearing
Stainless steel.
Drive Magnet
Plated Alnico.
Gear Housing
Acetal.
Float
Nitrile rubber.
Gasket
Buna-N, 0015-00423.
Direct Reading Dial
Hermetically sealed polycarbonate.
TwinSite® Sender
Polyamide.
Dial Screws
Plastite 0040-00479.
订购时指定:
1. Gauge model number.
2. Choice of dials.