Description
General Specifications*
Mounting
Designed for top-mounting only. Gauge uses 1 1⁄2” NPTF threaded head.
Accuracy
Accuracy depends upon proper gauge sizing. Direct read dials +/-7%. Accuracy may be less depending upon tank shape. Accuracy may be less near full and empty. Accuracy may be less if tank is not level. This gauge is not to be used for filling. All accuracy estimates are expressed as a percent of full scale.
Temperature
Standard operating range is -40°F to 158°F, -40°C to 70°C.
Shock & Vibration
Suitable for mobile, off-road medium duty, and marine applications.
Tank Pressure
0 to 14.5 psig [0 – 1.0 Bar] maximum.
Tank Opening Details
See drawing below.
*Note: For gauge installation instructions see MS-516.
When Ordering Specify:
1. Gauge model number.
2. Tank depth.
3. Riser height, if any.
Materials of Construction*
Head
Acetal.
Guide Rod
Stainless steel.
Centershaft
Stainless steel.
Tie Plate
Stainless steel.
Guide & Bearing Pin
Stainless steel.
Float
Nitrile ebonite.
Drive Magnet
Nylon 12 composite.
Standard Dial
Copolymer, hermetically sealed, gasoline resistant.
Bearings
Acetal.
*Materials and specifications are subject to change without notice.Pressure ratings subject to change due to temperature and other environmental considerations.
01-08-2015
