描述
一般规格 *
Mounting
Designed for “Press Fit” top-mounting only.
Recommended hole size: 1.486″±0.020″ (37.75mm ± 0.50mm).
Tank thickness: 0.079″ – 0.394″ 2.0mm – 10.00mm).
Accuracy
Accuracy depends upon proper gauge sizing. Direct read dials +/-7%. Accuracy may be less depending upon tank shape. Accuracy may be less near full and empty. Accuracy may be less if tank is not level. This gauge is not to be used for filling. All accuracy estimates are expressed as a percent of full scale.
Temperature
Standard operating range is -40°F to 158°F, -40°C to 70°C.
Shock & Vibration
Suitable for mobile, and off-road light duty applications.
Tank Pressure
0 to 6 PSIG [0 to 0.4 Bar] maximum.
Tank Opening Details
See MS-520.
订购时指定:
1. Gauge model number.
2. Tank height.
3. Riser height, if any.
4. Optional Viton Seal.
建筑材料 *
Head
Acetal.
Seal
Nitrile Rubber (Optional Viton Seal).
Guide Rod
Stainless steel.
Centershaft
Stainless steel.
Tie Plate
Stainless steel.
Guide & Bearing Pin
Stainless steel.
Float
Nitrile ebonite.
Drive Magnet
Nylon 12 composite.
Standard Dial
Copolymer, hermetically sealed, gasoline resistant.
Magnet Holder & Centershaft Holder
Acetal.
* 材料和规格如有更改, 恕不另行通知。压力额定值可能会因温度和其他环境因素而发生变化。
01-08-2015