Descripción
Materiales de construcción *
Head
Aluminum or brass.
Drive Magnet
Alnico.
Centershaft
Stainless steel.
Pinion-shaft & Support Tubes
Aluminum.
Gears, Cross Stud, & Bearings
Stainless steel.
Gear Housing
Acetal.
Float
Nitrile rubber.
Approvals
Gauges are UL listed for LP Gas service applications.
U.S. Patents
6,523,406; 6,253,609; 6,523,406; 7,219,546
Al ordenar especifique:
1. Gauge head size (Jr., Sr., 1 1⁄4″ NPTF, or 1″ NPTF).
2. Aluminum or brass.
3. Tank diameter shown on nameplate.
4. Mounting location (top, side, end or angle).
5. If the gauge is angle mounted, state the degree of angle above or below the horizontal centerline, or the distance in inches above or below the horizontal centerline to the center of the gauge opening.
6. If the gauge is end mounted, state the shape of the tank head (hemispherical or semi-ellipsoidal).
7. Specify the “H” dimension. This is the distance in inches from the surface of the tank to the top of the mounting surface.
Para pedir un medidor de repuesto, simplemente proporcione la información estampada en una de las secciones planas en el lado del cabezal del medidor como se muestra en el ejemplo siguiente.
* Los materiales y especificaciones están sujetos a cambios sin previo aviso. Las clasificaciones de presión están sujetas a cambios debido a la temperatura y otras consideraciones medioambientales.
Instrucciones para la Asamblea