Description
General Specifications*
Mounting
Side or angle mount.
Dial Data
Dials are hermetically sealed and tested in a 8″ Hg vacuum. Fractional calibration is standard with gallonage calibration optional. Dial angles, computer generated, from customer supplied strapping tables are also an option. Fluorescent dials optional.
Accuracy
Depends on proper sizing of gauge and tank configuration. Direct accuracy is ±2.5%. Maximum parallax error = 1.5%. Repeatability direct = 1%. Sensitivity = 1%. Hysteresis is 2% including gear and pointer lag. Fricitional loss = 1%. 100% conformity inspection optional.
Temperature Range
Standard range is -50°F to 200°F, -45°C to 93°C.
Shock
Tested per MIL-S-901B, naval std. (similar gauge)
Vibration
Tested per MIL-STD-167, naval std. (similar gauge)
Tank Pressure
0 to 50 PSI, [0 to 3,4 Bar].
Approvals
U.L. listed for flammable liquids.
*Materials and specifications are subject to change without notice. Pressure ratings subject to change due to temperature and other environmental considerations.
Materials of Construction*
Head
Diecast aluminum. 4-1/4″ [107, 9] B.C.
Gasket
Buna “N” 0015-00422.
Dial Chamber
Aluminum with tempered glass crystal. Polycarbonate crystal optional.
Drive Magnet
Alnico.
Centershaft, Cross Stud, Support and Float Arm
Stainless spring steel.
Gear and Bearings
Hard nickel-coated stainless steel.
Float
Closed cell hard nitrile rubber.
Gear Housing
Stainless steel.
Material Trim for Water Service
When Ordering Specify:
All options desired. Always furnish tank drawing and strapping table.