Descripción
Tipo de cilindro | Cilindrada | Diámetro de la capacidad | Calibre con esfera atornillada | Medidor con Dial Snap-on | Longitud de soporte | Longitud de flotador |
---|---|---|---|---|---|---|
Universal | 20 # [9 kg] | 12 "ID. [305] | 7384-01005 | 7384-02004 | 7-1/8 "[181] | 5-1/4 "[133] |
33-1/2 # [15 kg] | 7384-01006 | 7384-02005 | 12-5/16 "[313] | |||
43-1/2 # [20 kg] | 7384-01007 | 7384-02006 | 19-1/4 "[489] | |||
Vertical | 14 # [6, 4 kg] | 9 "ID. [229] | 7381-01003 | 7381-02205 | 10-3/4 "[273] | 4 "[102] |
20 # [9 kg] | 12 "ID. [305] | 7381-01002 | 7381-02206 | 7-5/16 "[186] | 6-7/16 "[163] | |
Horizontal | 20 # [9 kg] | 7384-01028 | — | 5 "[127] | ||
33-1/2 # [15 kg] | ||||||
43-1/2 # [20 kg] | ||||||
60 # [27 kg] | ||||||
60 # [27 kg] | 14-1/2 "ID. [368] | 7384-01029 | — | 8-1/2 "[216] | 7-3/4 "[197] | |
100 # [45 kg] |
Especificaciones generales *
Temperature
Standard range is -40°F to 158°F, -40°C to 70°C.
Shock
Designed for lift truck and portable cylinder service applications.
Vibration
Designed for lift truck and portable cylinder service applications.
Working Pressure
375 psig [25,8 Bar]
Approvals
UL listed for LP Gas service applications.
Al ordenar especifique:
1. For standard gauges, use the part number from the lift truck gauge selection chart.
2. For non-standard gauges, state the cylinder type (horizontal or vertical), capacity, diameter, height, mounting location, offset, and furnish tank drawings whenever possible.
3. Furnish riser or recess dimensions if applicable.
Para pedir un medidor de repuesto, simplemente proporcione la información estampada en una de las secciones planas en el lado del cabezal del medidor como se muestra en el ejemplo siguiente.
Materiales de construcción *
Head
Zinc die casting.
Centershaft Bearings, Gears, & Dial Mounting Screws
Stainless steel.
Support, Centershaft & Float Rod
Tempered aluminum.
Gear Housing
Acetal.
Float Bulb
Nitrile rubber.
Counterweight
Lead.
Magnet
Alnico.
Direct Reading Dials
Ultrasonically welded, hermetically sealed polycarbonate.
* Los materiales y especificaciones están sujetos a cambios sin previo aviso. Las clasificaciones de presión están sujetas a cambios debido a la temperatura y otras consideraciones medioambientales.