Descripción
Modelos Junior | Descripción |
---|---|
6281 | Para un montaje superior, incluye un imán estándar para dirigir los diales de lectura directa. |
6284 | Igual que 6281, excepto para montaje lateral, final o angular. |
6241 | Para un montaje superior, incluye un imán más fuerte para impulsar los remitentes TwinSite®. |
6244 | Para montaje lateral, final o ángulo, de lo contrario igual que 6241 |
B6244 | Igual que 6244, excepto con cabeza de latón |
Modelos Senior | Descripción |
---|---|
6280 | Para un montaje superior, incluye un imán estándar para dirigir los diales de lectura directa. |
6283 | Igual que 6280, excepto para montaje lateral, final o angular. |
6290 | Para un montaje superior, incluye un imán más fuerte para conducir una esfera grande de 4 ". |
6293 | Igual que 6290, excepto para montaje lateral, final o ángulo. |
Especificaciones generales *
Temperature
Standard range is -40°F to 176°F, -40°C to 80°C with optional stainless steel mounting bolts which maybe required for temperatures below -20°F, -29°C.
Accuracy
Accuracy depends upon proper gauge sizing. Junior and Senior dials ±5%, 4” dials ± 4%, TwinSite® dials ±8%. Hall dial output ±4% of visual reading. Accuracy may be less depending upon tank shape. Accuracy may be less near full and empty. Accuracy may be less if tank is not level. Accuracy may be less due to variations in liquid temperature. This gauge is not to be used for filling. All accuracy estimates are expressed as percent of full scale.
Humidity
For high humidity below ground or under chassis applications, brass, stainless steel or painted aluminum heads are recommended.
Shock & Vibration
Suitable for mobile service applications.
Power
0.5 watts maximum dissipation for TwinSite® versions.
Work Pressure
375 psi. [25,5 Bar].
Approvals
Gauges are UL listed for LP Gas service applications.
Al ordenar especificar
1. Gauge head size, Junior or Senior, or model #.
2. Tank diameter shown on nameplate.
3. Mounting location (top, side, end or angle).
4. If the gauge is angle mounted, state angle.
5. If the gauge is end mounted, state the shape of the tank head (hemispherical or semi-ellipsoidal).
6. Specify the “H” dimension (the distance in inches from the surface of the tank to the gasket surface on the riser).
Para pedir un medidor de repuesto, simplemente proporcione la información estampada en una de las secciones planas en el lado del cabezal del medidor como se muestra en el ejemplo siguiente.
Note: For installation instructions see MS-501/502 (mounting standard).
Materiales de construcción *
Head
Aluminum die casting standard. Model B6244 has brass head. Models 6290 and 6293 have stainless steel head.
Gear Housing
Aluminum die-casting or acetal.
Centershaft Bearings, Gear, Pinion, Cross Stud & Bearing, & Dial Screws
Stainless steel.
Support, Centershaft & Float Rod
Tempered aluminum.
Float Bulb
Nitrile rubber or one piece aluminum.
Counterweight
Steel-plated.
Magnet
Neo.
Gasket
Buna-N standard. Spiral wound, Teflon-filled, stainless steel on models 6290 and 6293.
Mounting Bolts
Zinc-plated steel. (Stainless steel optional.)
Junior Direct Reading Dials & TwinSite® Senders
Ultrasonically sealed polycarbonate.
Senior Dials
Aluminum with acrylic or polycarbonate crystal, sealed with rubber gasket.
4″ Dials
Aluminum with glass crystal, sealed with a rubber gasket.
* Los materiales y especificaciones están sujetos a cambios sin previo aviso. Las clasificaciones de presión están sujetas a cambios debido a la temperatura y otras consideraciones medioambientales.