header graphic

F7384

Lever Type Bulls Eye Gauge

Application

The F7384 Bulls Eye Gauge is a 3/4" NPTF lever type gauge designed for use in monitoring liquid levels at High, Normal, and Low. It is used on crankcase and lubrication systems to provide level readings ensuring sufficient oil levels are maintained at all times

General Information & Features

The F7384 Bulls Eye Gauge provides the same range of readings as a glass sight tube (2 connections required) with only one connection required on the tank.

Documents

Data Sheet

MS-516 Installation Instructions

General Specifications*

Mounting

Designed for side mounting only.

Temperature Range

Standard operating range -40°F to 158°F, -40°C to 70°C. At 150°F (49°C) air temperature, maximum temperature is 250°F (120°C).

Working Pressure

375 psig [25,8 Bar] with Zinc Head; 440 psig [30 bar] with Brass Head.

Approvals

UL Listed as LP Gas automotive accessory.

Copolymer

Dial is resistant to paint thinners and other solvents.

When Ordering Specify:

Measurement span (distance from top to bottom of green zone in tank).

Materials of Construction*

Head

Die cast zinc. (Also available in brass.)

Seal

Thread sealant.

Guide Tube

Aluminum.

Centershaft

Aluminum.

Bearings

Stainless steel.

Float

Aluminum. (Also available in nitrile rubber.)

Drive Magnet

Alnico.

Standard Dial

Ultrasonically welded, hermetically sealed polycarbonate. (Custom dial graphics optional.)

 

*Materials and specifications are subject to change without notice. Pressure ratings subject to change due to temperature and other environmental considerations.

06-18-2015